Menu
Brand New with Full Warranty!
Monitor Audio IWA-250
Color: Black
Play Product Video
250W power amp> Can drive up to tow IWS10 subwoofers
SELLING PRICE
$539.95
Availability:
In stock
SKU
IWA250
MSRP: $720.00
YOU SAVE: $180.05
SOLD AS: Each
Every single item that we sell is brand new, A-Stock merchandise. That means factory-sealed - not refurbished, not a demo and not a return. We purchase all our items through the authorized dealer network for each brand, so you get a full warranty at no additional cost.
Free shipping in the contiguous U.S.
Delivering up to 250 watts into 4 ohms, a single IWA-250 will power single or dual IWS-10's to provide higher power levels for larger rooms or to meet customer demands.
System Format
Active sub-woofer amplifier
Lower Frequency Limit
25Hz
Upper Frequency Limit
Variable 40-120 Hz @ 24dB/Octave
Amplifier Output
250W @ < 1% THD+N
Drive Unit Complement
4 - 8 ohms
Amplifier Classification
Class D amplifier with Switch mode power supply (SMPSU)
Cabinet Support
For use when using the dedicated back box
EQ
Music/ Movie/ Impact
Phase Control
0 & 180 degrees
Auto Sensing
Line Level > 3.5mV
Input Level Requirements
Standby after approximately 15 minutes if no signal sensed
Input Impedance
> 20K Ohms
Mains Input Voltage
AC 110 - 120V ~ 50/60Hz AC 220 - 240V ~ 50/60Hz (Factory Region Preset)
Dimensions (H x W x D)
43.7 x 432 x 263mm (13/4 x 17 x 103/8)
Connection
LFE in (Stereo RCA and Balanced), 12v Trigger in (3.5 mm mono mini-jack), left and right speaker output
Trigger Input
5 - 12v via 3.5mm mono mini-jack socket
Power Consumption
Standby: < 0.5W (ErP approved) Typical Idle: < 10W Max Rated: 200W
Weight (unpacked)
4kg (8lb 12oz)
System Format
Active sub-woofer amplifier
Lower Frequency Limit
25Hz
Upper Frequency Limit
Variable 40-120 Hz @ 24dB/Octave
Amplifier Output
250W @ < 1% THD+N
Drive Unit Complement
4 - 8 ohms
Amplifier Classification
Class D amplifier with Switch mode power supply (SMPSU)
Cabinet Support
For use when using the dedicated back box
EQ
Music/ Movie/ Impact
Phase Control
0 & 180 degrees
Auto Sensing
Line Level > 3.5mV
Input Level Requirements
Standby after approximately 15 minutes if no signal sensed
Input Impedance
> 20K Ohms
Mains Input Voltage
AC 110 - 120V ~ 50/60Hz AC 220 - 240V ~ 50/60Hz (Factory Region Preset)
Dimensions (H x W x D)
43.7 x 432 x 263mm (13/4 x 17 x 103/8)
Connection
LFE in (Stereo RCA and Balanced), 12v Trigger in (3.5 mm mono mini-jack), left and right speaker output
Trigger Input
5 - 12v via 3.5mm mono mini-jack socket
Power Consumption
Standby: < 0.5W (ErP approved) Typical Idle: < 10W Max Rated: 200W
Weight (unpacked)
4kg (8lb 12oz)
Write Your Own Review
Featured Products
