Menu
Brand New with Full Warranty!
Halo by Parasound A23+ Silver
Color: Silver
Play Product Video
2-Channel Amplifier
SELLING PRICE
$1,599.95
Availability:
In stock
SKU
A23+ Silver
MSRP: $2,000.00
YOU SAVE: $400.05
SOLD AS: Each
Every single item that we sell is brand new, A-Stock merchandise. That means factory-sealed - not refurbished, not a demo and not a return. We purchase all our items through the authorized dealer network for each brand, so you get a full warranty at no additional cost.
Free shipping in the contiguous U.S.
A23+ Technical Specs
Power Output Stereo Mode (0.06% THD)
160 watts x 2, 8 both channels driven
240 watts x 2, 4 both channels driven Power Output Stereo Mode (0.9% THD)
210 watts x 2, 8 both channels driven
300 watts x 2, 4 both channels driven Power Output Bridged Mode (0.06% THD)
500 watts x 1, 8
Bridged 4 operation is not recommended Power Output Bridged Mode (0.9% THD)
600 watts x 1, 8
Bridged 4 operation is not recommended
*All Power measurement are at 120 VAC,
RMS continuous power, full audio band (20Hz - 20kHz) Current Capacity
45 amps peak, per channel Slew Rate
> 130 volts per microsecond Frequency Response
5Hz - 100kHz, +0/-3 dB
20Hz - 20kHz, +0/-0.25 dB Total Harmonic Distortion (THD)
< 0.06% at full power
< 0.03% at typical listening levels IM Distortion
< 0.04% TIM
Unmeasurable Inter-channel Crosstalk
> 85dB at 1kHz
> 70dB at 20kHz Input Impedance
Unbalanced: 33k
Balanced: 66k,(33k per leg) Total Gain
29dB Input Sensitivity for 28.28 V Out (8 Load)
Unbalanced: 1 V
Balanced: 1 V per leg S/N Ratio
> 112dB, input shorted, IHF A-weighted
> 107dB, input shorted, unweighted Damping Factor
> 800at 20Hz DC Trigger Requirements
+9 Vdc to +12 Vdc, 5mA Audio Trigger Requirements
2 mV - 10 mV XLR Pin Identification
1 = Ground (Shield)
2 = Positive
3 = Negative (Return) Dimensions
Width: 17-1/4" (437mm)
Depth: 15"-1/4" (388mm)
Depth, with cables 17" (432mm)
Height, with feet: 4-1/8" (105mm)
Height, without feet: 3-1/2" (89mm), 2U Net Weight
27lb. (12.2kg) Shipping Weight
34lb. (14.4kg) Power Requirement
Standby: <1 Watt
Idle (no music playing): 75 Watts
Typical Listening levels: 125 Watts
Maximum: 800 Watts
110-125 VAC 60Hz or 220-250VAC 50Hz
AC mains voltage is set on rear panel
Power Output Stereo Mode (0.06% THD)
160 watts x 2, 8 both channels driven
240 watts x 2, 4 both channels driven Power Output Stereo Mode (0.9% THD)
210 watts x 2, 8 both channels driven
300 watts x 2, 4 both channels driven Power Output Bridged Mode (0.06% THD)
500 watts x 1, 8
Bridged 4 operation is not recommended Power Output Bridged Mode (0.9% THD)
600 watts x 1, 8
Bridged 4 operation is not recommended
*All Power measurement are at 120 VAC,
RMS continuous power, full audio band (20Hz - 20kHz) Current Capacity
45 amps peak, per channel Slew Rate
> 130 volts per microsecond Frequency Response
5Hz - 100kHz, +0/-3 dB
20Hz - 20kHz, +0/-0.25 dB Total Harmonic Distortion (THD)
< 0.06% at full power
< 0.03% at typical listening levels IM Distortion
< 0.04% TIM
Unmeasurable Inter-channel Crosstalk
> 85dB at 1kHz
> 70dB at 20kHz Input Impedance
Unbalanced: 33k
Balanced: 66k,(33k per leg) Total Gain
29dB Input Sensitivity for 28.28 V Out (8 Load)
Unbalanced: 1 V
Balanced: 1 V per leg S/N Ratio
> 112dB, input shorted, IHF A-weighted
> 107dB, input shorted, unweighted Damping Factor
> 800at 20Hz DC Trigger Requirements
+9 Vdc to +12 Vdc, 5mA Audio Trigger Requirements
2 mV - 10 mV XLR Pin Identification
1 = Ground (Shield)
2 = Positive
3 = Negative (Return) Dimensions
Width: 17-1/4" (437mm)
Depth: 15"-1/4" (388mm)
Depth, with cables 17" (432mm)
Height, with feet: 4-1/8" (105mm)
Height, without feet: 3-1/2" (89mm), 2U Net Weight
27lb. (12.2kg) Shipping Weight
34lb. (14.4kg) Power Requirement
Standby: <1 Watt
Idle (no music playing): 75 Watts
Typical Listening levels: 125 Watts
Maximum: 800 Watts
110-125 VAC 60Hz or 220-250VAC 50Hz
AC mains voltage is set on rear panel
Write Your Own Review
Featured Products
